Products Name: Chlorinatedpolyethylenerubber(CM-35B)
1. Product introduction
Chlorinated polyethylene rubber is used for structural saturated by special thermoplastic elastomer, is dedicated to replace with chlorine polyethylene reaction of chlorinated polyethylene new rubber. The residue of crystallization is low, low temperature vulcanization, plastic door, excellent performance and viscosity with good low temperature resistance, heat resistance, oil resistance, ageing resistance, high temperature resistant, flexible, flame retardant properties, neoprene (CR), butylbenzene rubber (SBR), natural rubber, butyronitrile rubber (NBR), silicon rubber, chlorosulfonated polyethylene (CSM), triple the c (EPDM rubber arbitrarily mixing ratio), etc.
Serial number |
Project |
Unit |
Index |
1 |
Chlorine content |
% |
35+2 |
2 |
Residual crystallinity(J/g) |
%≤ |
2 |
3 |
Volatile content |
%≤ |
0.4 |
4 |
Screenings(0.9mm) |
%≤ |
2 |
5 |
Shao’s hardness |
A°≤ |
60 |
6 |
Thermal decomp temeperature |
℃≥ |
165 |
7 |
Tensile strength |
MPa≥ |
8.5 |
8 |
Mooney Viscosity |
ML121℃1+4 |
65+5 |
9 |
Elongation |
%≥ |
800 |
Note: if you have special request for more when ordering, please explain in advance.
3. Product usage
The product has excellent compatibility and high, can fill a general synthetic rubber modified agents or add solvent, also used for special synthetic rubber, join other auxiliary flame-retardant cables after manufacture all kinds of internal and external wall sheath, seal, flame retardant belt, automobile use hose, rubber v-belts, waterproof, seals, etc, also can greatly reduce the cable and other products, the production cost is excellent performance in general, special rubber, rubber processing equipment.
|
